How to change rear wiper blades

Lift the plastic cap off the rear wiper blade. Unscrew the 13 mm screws with all the flat-head screwdriver. Lift the wiper arm off the windshield as well as plastic cover beneath the arm. Unscrew the 22 mm screws then get off the wiper off. Go within the car and into the back seat.

Take away the rear windshield wiper panel and unplug the wiper motor. Unscrew the ten mm screws. Get rid of the windshield wiper motor unit from the within and after that go outside and loosen the old blade in the wiper unit. Replace the old wiper blade with the new 1.

Fasten the blade to your wiper on the outdoors after which go back in to the automobile and fasten the windshield wiper motor unit and screw the unit back in location using the ten mm screws. Go back outside the automobile and then screw while in the 22 mm screws.

Place the wiper arm back into its authentic position so that the new blade is touching the rear-view window. Screw the 13 mm screws back into area after which place the plastic cap back over the rear windshield wiper. Check out the wiper. Turn the auto on and after that start off the rear windshield wiper.